With the Stix Switch 2-Pack, your lighting options are endless. How? The Stix Switch features the ability to switch between red and white modes with a simple, long press of the power button. So, if you need extra light up front, more visibility at the rear, or a traditional front/rear combo, the Stix Switch 2-Pack delivers.
Headlight or taillight—you decide. A 2-pack gives you even more options.
Press-and-hold for two seconds to shift between white and red modes.
Fresnel lens for maximum visibility in all directions.
Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately).
340mAh battery recharges via built-in USB tab in two hours (no extra cables needed).
White Steady mode: 65 lumens for 2:00 hours
White Power Flash mode: 100 lumens for 6:00 hours
White Eco Flash mode: 35 lumens for 16:00 hours
Red Steady mode: 18 lumens for 2:00 hours
Red Surge Glow mode: 16 lumens for 7:00 hours

Cross country racing is demanding, requiring the ultimate in concentration, plus confidence in every little part of your race rig. That's why our XC Race Grips are designed to be super light and to provide an excellent bar feel that's more than just comfortable. Further along these lines, we made them to be low profile and with an incredible hand-to-bar contact that delivers a feeling of confident control and superior handling over the most technical of race courses.

• Low profile design provides more direct feel and improved bar control.
• Silicone/foam material provides optimal comfort and grip. Available in regular and X-Large sizes.
• The grips' tacky texture provides added bar control.
• Small/Medium diameter: 30mm
• Large/X-Large diameter: 32mm

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough.

• SWAT™-compatible design allows for storage and tool integration.
• Super-low bottle position improves the aerodynamic profile.
• Tuned compression design provides a secure bottle retention with easy in-and-out accessibility.
• Reinforced composite material improves durability without adding weight.
• Sleek, minimalist design with razor-sharp graphics.
• Accepts SWAT™ Cage Mount Road or MTB Tool.
• Accepts MTB SWAT™ Box (when used on compatible frames).
• Weight: 33g

The Clarks Noodle Cable Guide, V 135D with Boot is a high-quality component designed to optimize the performance of your braking system. Engineered by CLARKS, a trusted name in cycling accessories, this cable guide ensures smooth and accurate braking, enhancing your overall cycling experience.

Made from durable materials, this cable guide is built to withstand the rigors of regular use, providing reliable performance over time. Its design facilitates easy installation and maintenance, making it a practical choice for cyclists of all levels.

• Optimized for smooth and precise braking
• Durable construction for long-lasting use
• Easy to install and maintain

Orange Seal Tubeless Sealant 16Oz

The Orange Seal Tubeless Sealant is essential for maintaining your tubeless bike tires' performance. Renowned for its ability to seal large punctures up to 1/4 inch, this sealant is compatible with most bike tire systems and performs reliably under various conditions, including extreme temperatures and altitudes.

• Eco-friendly composition
• Seals punctures quickly and effectively
• Available in multiple refill sizes

The S-works Power with Mirror technology is the perfect reflection of you.

We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened decades ago with the introduction of foam. To develop a next-generation saddle, we had to look beyond foam and develop a next-generation technology. The S-Works Power Saddle with Mirror is the future.

We developed Mirror technology by 3D printing from a liquid polymer to perfectly reflect your anatomy. This revolutionary process creates a complex honeycomb structure that allows us to infinitely tune the material’s density in a way impossible with foam. The result is a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually.

And when you combine this technology with our extremely lightweight S-Works Power saddle, with its flexed-tuned FACT carbon shell and ultra-light rails, you get a high-performance saddle that's designed to help you perform at your best. It features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort for your unique position.

Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort.
FACT carbon fiber shell is flex-tuned for support and ride compliance.
Ultra-light oversized FACT carbon rails.
SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.

The Dakine Pickup Pad is the ultimate solution for transporting bikes securely on your truck's tailgate. Designed specifically for traditional full-size tailgate designs, the large model can accommodate up to seven bikes, providing unmatched convenience and ease of use.

Built with durability in mind, the Dakine Pickup Pad features reinforced webbing straps and cam-action buckles for quick installation and removal. A built-in security grommet allows you to lock the pad to your truck, ensuring peace of mind during transport.

• Accommodates up to seven bikes
• Quick installation and removal with cam-action buckles
• Secure locking with built-in security grommet
• Durable construction for long-lasting use

The Zee Cage II has incredible holding power, and it's compatible with SWAT™ solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the left-hand side.

• SWAT™-compatible design allows for storage and tool integration.
• Reinforced composite material improves durability without adding weight.
• Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area.
• Left-hand loading on the down tube—right-hand loading on the seat tube.
• Sleek, minimalist design with razor-sharp graphics.
• Accepts SWAT™ Cage Mount MTB Tool.
• Accepts MTB SWAT™ Box (when used on compatible frames).
• Weight: 43g

The new S-Works Carbon Rib Cage III keeps the 100% FACT carbon fiber construction of yesteryear, but it ups bottle retention for super rough roads. The split design also provides pre-load to hold bottles securely, while makimg bottle entry as easy as possible.

• FACT carbon construction creates a splendid fusion of strength, optimal botle retention, and light overall weight.
• Super-low bottle position improves the aerodynamic profile.
• Tuned compression design provides secure bottle retention with easy in-and-out accessibility.
• Weight: 24g

Specialized Air Tool Flex Pump

The Specialized Air Tool Flex Pump is designed for both mountain and road bike enthusiasts. Its innovative inverted chamber design enables quick inflation for mountain bike tires while still being capable of achieving the high pressures required for road tires. This versatile pump features compatibility with both Schrader and Presta valves, making it a must-have tool for any cyclist.

• Inverted chamber design for efficient pumping
• Compatible with Schrader and Presta valves
• Suitable for both mountain and road bike tires

The Shimano ST-5700 Bracket Covers are essential for cyclists looking to maintain the functionality and appearance of their Shimano ST-5700 shifters. These bracket covers provide protection and a comfortable grip, ensuring optimal performance during rides. Designed specifically for the ST-5700 model, these covers are the perfect replacement for worn-out or damaged parts, ensuring your bike's components remain in top condition.

Crafted from high-quality materials, these bracket covers offer durability and a precise fit, making installation straightforward. Cyclists can enjoy a seamless riding experience with these reliable and stylish black bracket covers.

• Designed for Shimano ST-5700 shifters
• Durable construction for long-lasting performance
• Easy installation for a perfect fit
• Enhances grip and protection

The LTD Mirrycle Mirror is designed specifically for Bontrager Isozone handlebars, offering a perfect fit with its die-cast end plug for secure mounting. This versatile mirror features a 3-inch convex round glass that provides a wide field of view and can be adjusted to any angle, ensuring optimal visibility and safety on the road.

Installation is straightforward, with both sizes of Allen wrenches included. The durable design mirrors the Mountain Mirrycle in all other aspects, making it a reliable choice for cyclists.

• Designed for Bontrager Isozone handlebars
• 3-inch convex round glass for a wide field of view
• Adjustable viewing angle
• Includes necessary Allen wrenches for easy installation

The Sunlite Handlebar Mounted Water Bottle Holder is a practical accessory for cyclists looking to keep their hydration within easy reach while riding. This versatile bike water bottle cage is designed to securely attach to handlebars, ensuring your drink stays stable even on rough terrains.

Constructed from durable materials, this bottle holder fits a variety of bottle sizes and is easy to install, making it a convenient choice for both casual and serious cyclists.

• Easy handlebar mounting with a 25.4mm clamp
• Compatible with various bottle sizes
• Durable construction for long-lasting use

The Greenfield KS-3 Kickstand is a reliable and sturdy option for cyclists seeking a dependable solution for parking their bikes. This kickstand is made from durable aluminum, ensuring longevity and resistance to wear and tear. With a length of 285mm, it is suitable for a wide range of bike sizes and styles.

Designed by Greenfield, a trusted name in bicycle components, this kickstand offers easy installation and a secure hold. Whether you're an avid cyclist or a casual rider, this kickstand provides the support you need.

• Constructed from high-quality aluminum for durability
• 285mm length suitable for various bike sizes
• Easy to install and adjust
• Provides stable support for parked bikes

The Blackburn Camber UD Carbon Cage is a versatile and robust bottle cage designed for both mountain and road bikes. It is crafted from uni-directional carbon fiber, ensuring maximum strength with minimal weight, making it an ideal choice for cyclists who demand performance without compromising durability.

This bottle cage offers a firm grip to keep your bottles secure during rides. Its sleek design complements modern carbon frame bikes perfectly, reflecting current trends in cycling aesthetics.

• Made from lightweight uni-directional carbon fiber
• Designed for both MTB and road bikes
• Firm grip for secure bottle holding
• Backed by a lifetime warranty

Zee Cage II with Integrated Tool

The Specialized Zee Cage II with Tool is an essential accessory for any cycling enthusiast. Designed with an integrated EMT Cage Mount MTB Tool, this cage provides all the necessary features to handle trailside repairs efficiently. Its robust design ensures your hydration and tools are securely held, even on the roughest trails.

• Integrated EMT Cage Mount Tool for quick repairs
• Secure hold for bottles and tools during rides
• Durable construction suitable for all trail conditions

Enhance the comfort and extend the life of your cycling gear with the Kask Valegro Internal Pad Replacement. Specifically designed for the Valegro helmet, this replacement pad ensures a perfect fit, maintaining the safety and performance standards you've come to expect from KASK products.

The inner padding is meticulously crafted to provide optimal ventilation and comfort, ideal for long rides. Keep your helmet feeling fresh and new with these easily replaceable pads.

• Custom fit for KASK Valegro helmets
• Improves helmet longevity and comfort
• Easy to replace and maintain

The Wolf Tooth RoadLink Derailleur Hanger Extension is an innovative solution for cyclists seeking to expand their bike's gear range. This patented device allows road derailleurs to accommodate a wide-range mountain bike style cassette, making it perfect for road, gravel, and cyclocross bikes. The RoadLink is designed for easy installation and optimizes the use of Shimano road derailleurs, supporting 10 or 11-speed cassettes up to 40T.

Whether you're converting to a single front chainring or need lower gearing for steep climbs, the RoadLink ensures smooth shifting without compromising performance in smaller cogs. It is compatible with various cassette sizes and works best with medium cage rear derailleurs. Please note that triple chainrings and Direct Mount-native frames are not supported.

• Patented derailleur hanger extension
• Supports wide-range cassettes up to 40T
• Optimized for Shimano road derailleurs
• Simple installation in under 5 minutes

The Genuine Innovations Side of Bacon Tubeless Plug Refill is your go-to solution for quick and reliable bike tire repairs. Designed to swiftly plug those pesky punctures, these rope plugs are made from tough, vulcanized butyl rubber, ensuring durability and efficiency.

Each Side of Bacon package contains 20 plugs, perfectly sized at 0.125 inches wide and 2 inches high, making them a handy addition to any cyclist's toolkit. Pair them with the Tubeless Tackle Kit or Tubeless Repair Kit for seamless fixes on the go.

• Includes 20 durable rope plugs
• Constructed from vulcanized butyl rubber
• Compatible with Tubeless Tackle Kit and Tubeless Repair Kit

The CycleOps Sweat Guard is an essential accessory for indoor cycling enthusiasts. It is designed to protect your bike from the damaging effects of sweat during intense workouts. Crafted from soft, absorbent terry cloth, this sweat guard is easy to attach with elastic and Velcro straps, ensuring it stays in place during your ride.

Featuring practical front pockets, it allows you to keep essentials like your remote, phone, or snacks within reach. The washable material makes maintenance simple, ensuring your sweat guard remains fresh and effective over time.

• Soft, absorbent terry cloth construction
• Easy attachment with elastic and Velcro straps
• Practical front pockets for small essentials
• Protects bike from corrosive sweat
• Washable for easy maintenance

The new S-Works Carbon Rib Cage III keeps the 100% FACT carbon fiber construction of yesteryear, but it ups bottle retention for super rough roads. The split design also provides pre-load to hold bottles securely, while makimg bottle entry as easy as possible.

• FACT carbon construction creates a splendid fusion of strength, optimal botle retention, and light overall weight.
• Super-low bottle position improves the aerodynamic profile.
• Tuned compression design provides secure bottle retention with easy in-and-out accessibility.
• Weight: 24g

The ABC Adjustable Bottle Cage by BiKASE is the ultimate solution for cyclists seeking versatility in their hydration setup. This innovative water bottle holder is designed to accommodate nearly any bottle, cup, or container ranging from 2 1/4" to 4 3/4" in diameter. Its adjustable mechanism, operated by a simple turn knob, ensures a secure fit.

Featuring a unique interference fit system, the cage allows for easy insertion and removal of your drink, making it perfect for those on-the-go moments during your ride. Crafted with convenience in mind, it includes adapters for mounting on the handlebar, frame, or seat post.

• Adjustable to fit a wide range of bottle sizes
• Easy-to-use turn knob for securing your drink
• Includes mounting adapters for various bike parts
• US Patent: 11772733B2

The XLAB Refresh Kit is designed to revive your Torpedo hydration system, ensuring it looks and performs like new. This kit includes all necessary components to maintain optimal functionality and appearance.

With the Refresh Kit, your hydration system will benefit from enhanced durability and efficiency, backed by XLAB's engineering excellence.

• Includes essential maintenance components
• 1 Year LIMITED Warranty for the original owner
• Improves both aesthetics and performance

The 100% FACT carbon fiber S-Works Carbon Zee Cage II is compatible with SWAT™ solutions for tool and storage integration. It also features a unique right-side loading design that allows you to easily manage bottles when space on the frame is limited, or for when you're down in the drops. 

• SWAT™ technology design allows for storage and tool integration.
• FACT carbon construction creates a splendid fusion of strength and light overall weight.
• Side-load design for easy in-and-out accessibility for frames with compact bottle mounting area.
• Right-hand loading on the down tube—left-hand loading on the seat tube.
• Accepts EMT Cage Mount MTB Tool.
• Accepts MTB XC Box (when used on compatible frames).
• Weight: 28g

The Shimano ST-R9170 Bracket Covers are a high-quality replacement for your Shimano STI levers, designed to offer excellent grip and comfort. Ideal for cyclists looking to enhance their biking experience, these covers provide a snug fit and superior durability.

Made from premium materials, the bracket covers ensure long-lasting performance even under demanding conditions. They are easy to install, allowing for a quick update to your bike's handlebar system.

• Designed specifically for Shimano ST-R9170 levers
• Durable construction for extended use
• Easy to install and replace
• Provides enhanced grip and comfort

A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch.

• Headlight or taillight—you decide.
• Press-and-hold for two seconds to shift between white and red modes.
• Fresnel lens for maximum visibility in all directions.
• Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately).
• 340mAh battery recharges via built-in USB tab in two hours (no extra cables needed).
• White Steady mode: 65 lumens for 2:00 hours
• White Power Flash mode: 100 lumens for 6:00 hours
• White Eco Flash mode: 35 lumens for 16:00 hours
• Red Steady mode: 18 lumens for 2:00 hours
• Red Surge Glow mode: 16 lumens for 7:00 hours

The Shimano ST-R8050 Bracket Cover is designed to provide superior protection and comfort for your Shimano Ultegra Di2 STI levers. These high-quality lever hoods ensure a sleek aesthetic and reliable performance for cyclists of all levels. Constructed from durable materials, these covers are engineered to withstand regular use while enhancing your grip during rides.

Upgrade your bike with these essential bracket covers that seamlessly blend with your cycling setup. Ideal for those looking to maintain the functionality and appearance of their Shimano components.

• Compatible with Shimano Ultegra ST-R8050 Di2 levers
• Durable and comfortable material
• Enhances grip and lever control

The SYNCROS Foil Aero Stem Front Computer Mount is designed to seamlessly integrate with the Foil Aero 1.5 stem, providing a secure and stylish solution for mounting your cycling computer. Crafted for both Garmin and Wahoo devices, this mount ensures that your data is always visible and accessible during your ride.

Constructed with precision, the mount fits neatly into the face plate of the stem, maintaining the aerodynamic profile of your bike. The Wahoo insert is available separately, offering flexibility for riders who use different devices.

• Compatible with Garmin and Wahoo computers
• Designed for Foil Aero 1.5 stems
• Maintains bike's aerodynamic profile
• Color: Black

The Shimano R8070 Bracket Cover is a high-quality replacement part designed specifically for Shimano's ST-R8070 shifters. Crafted to ensure a perfect fit and seamless operation, these covers help maintain the aesthetics and functionality of your bike's components.

Made from durable materials, the bracket covers offer excellent protection against wear and tear, ensuring your shifters remain in top condition. Ideal for road cyclists looking to upgrade or replace their existing covers.

• Compatible with Shimano ST-R8070 shifters
• Durable construction for long-lasting use
• Easy to install for quick replacement

The SRAM eTap Hood Covers are designed to provide optimal comfort and control for cyclists using eTap systems. These covers are crafted to fit seamlessly over your brake hoods, ensuring a secure grip and enhanced riding experience.

These hood covers are an essential accessory for maintaining the durability and performance of your SRAM eTap system. Easily replace worn-out hoods to keep your bike in top condition.

• Durable construction for long-lasting use
• Compatible with SRAM eTap systems
• Easy to install and maintain

The SRAM Rival eTap AXS Hydraulic Brake Lever Hood Covers are essential for road cyclists seeking precision and comfort. Designed to fit seamlessly with SRAM's eTap AXS systems, these hoods provide a secure grip for enhanced control and confidence during rides.

Constructed with durable materials, these brake lever hood covers ensure longevity and performance in all conditions. Their compatibility with SRAM's hydraulic systems makes them a versatile choice for cyclists looking to upgrade or replace their existing hoods.

• Compatible with SRAM Rival eTap AXS systems
• Durable construction for long-lasting use
• Designed to enhance grip and control
• Easy installation for quick upgrades

The 100% FACT carbon fiber S-Works Carbon Zee Cage II is compatible with SWAT™ solutions for tool and storage integration. It also features a unique left-side loading design that allows you to easily manage bottles when space on the frame is limited, or for when you're down in the drops. 

• SWAT™ design allows for storage and tool integration.
• FACT carbon construction creates a splendid fusion of strength and light overall weight.
• Side-load design for easy in-and-out accessibility for frames with compact bottle mounting area.
• Left-hand loading on the down tube—right-hand loading on the seat tube.
• Accepts SWAT™ Cage Mount MTB Tool.
• Accepts MTB SWAT™ Box (when used on compatible frames).
• Weight: 28g

This BB/PF30 Universal Adapter by Wheels Manufacturing is an essential component for cyclists looking to adapt their 24mm spindle cranks, such as Shimano and FSA, to a wide range of BB30/PF30 frames. Ideal for mountain bikes, road triples, and narrow-shell road bikes, this adapter ensures a secure and precise fit.

Designed for bottom bracket shell widths from 68mm to 83mm, the BBUNIV-SHIM kit makes installation straightforward, with two adapter shims and a comprehensive 13-piece spacer assortment included. The use of engineering-grade Delrin ensures durability and performance.

• Compatible with Shimano, FSA, and similar 24mm cranks
• Fits BB30/PF30 frames, including specific Cannondale models with additional adapters
• Includes spacers to adjust chainline and eliminate crank movement
• Easy installation with high-quality machining for precision

Endurance tire sealant, it's formulated to maximize longevity; enabling riders to go longer between top-offs. All while offering the same quick sealing properties you’ve come to expect.

Whether you’re a beginner, expert, or somewhere in-between you will benefit from its proven ability to last up to two to three times longer.

It is proven to seal large punctures up to 1/4" and perform under varying temperatures and altitudes. Orange Seal Tire Sealant is compatible with most bike tire systems and is eco-friendly.

The Problem Solvers Booster Front Hub Spacing Kit - 6-Bolt is the ideal solution for adapting non-Boost thru-axle hubs to fit any Boost-compatible frame or fork. Designed with precision, this kit extends the versatility of your bike setup, allowing for seamless integration.

Engineered for durability and performance, the kit includes all necessary spacers to ensure a secure and reliable fit. Whether you're upgrading your ride or making necessary adjustments, this hub spacing kit offers ease and efficiency.

• Compatible with non-Boost thru-axle hubs
• Includes all required spacers
• Easy installation process

The XLab Stealth Pocket 400XP is a top-tube bike nutrition bag designed with both form and function in mind. Its aerodynamic design and smooth woven nylon exterior make it an ideal choice for cyclists looking to minimize drag while ensuring easy access to essential items.

Featuring four exterior pockets, this bag offers convenient storage for small items, reducing the risk of dropping vital gear when you need it most. The reflective, insulated interior lining keeps your contents protected and visible, while the anti-slip rubber base ensures that the bag stays securely in place during your ride.

• Aerodynamic and sleek design minimizes drag
• Four exterior pockets for easy access
• Reflective, insulated interior for protection
• Anti-slip rubber base for secure placement
• 3 Year LIMITED Warranty for peace of mind

90-degree, twist-style mini CO2 used on SWAT™ products.

Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow.
Flow can be controlled or stopped by threading cartridge back into head.
Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

MO-94 The all round wonder spray! Take a closer look at what makes this tool box in a can the perfect protective spray for all things two or four wheeled.

HIGHLIGHTS

Free seized parts
Prevents dirt adhesion
Cuts down on friction to improve component efficiency

Looking for an all round wonder spray? Look no further! Muc-Off MO-94 covers all the bases with it's incredible formula that quickly and effectively penetrates moisture, lubricates moving parts and leaves a long lasting protective film. MO-94 prevents dirt adhesion and also drives out excess water to keep rust and corrosion at bay. MO-94 isn’t just for bikes, motorcycles or cars. Nope. It works on just about anything. Whether you’ve got a squeaky door hinge, a rusty lock or a bolt that you just can’t turn, MO-94 is all you need.

*Just remember not to apply MO-94 to your bike’s tire treads and braking surfaces!

FEATURES
Free's seized parts
Disperses moisture to prevent rust and corrosion
Provides light lubrication for moving parts
Reduces metal to metal contact
Prevents dirt adhesion
Cuts down on friction to improve component efficiency
Weight - 400g
Biodegradable*
* Contents only.

HOW TO
Apply Disc Brake Covers to prevent over-spray and contaminating your discs and pads
Spray MO-94 over the desired area for treatment
You can use the pink directional straw for smaller, harder to reach parts
Allow area to dry
Wipe away any excess using a microfiber cloth